Navigation

How to upload the program from TP270 using wincc flexible software?

Created by: asmanj at: 9/27/2017 1:29 PM (1 Replies)

9/27/2017 1:29 PM	Rate (0)
asmanj Posts: 9 Rating: (0)	hi guys ,first of all i say sorry because my English is bad. i want some detail .how to upload the program from TP270 using wincc flexible software . ------------------------------------------------------------------------------------------ Split from How to convert backup file of MP377 .psb to .fwd.
asmanj Posts: 9 Rating: (0)	Last edited by: Jen_Moderator at: 9/28/2017 10:06:48 AM New subject after splitting
Suggestion To thank Quote Answer

9/28/2017 10:09 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 11/7/2024 Posts: 22439 Rating: (3029)	Hello, this is only possible if during the download to the TP270 the option "enable backtransfer" was enabled. If this option was disabled no upload is possible. https://support.industry.siemens.com/cs/ww/en/view/21907703 Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users jnicol