Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

about TP070

Created by: fish at: 6/27/2008 4:31 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/27/2008 4:31 AM	Rate (0)
fish Advanced Member Joined: 9/28/2007 Last visit: 2/10/2022 Posts: 47 Rating: (0)	Dear all I have a project about TP070. Iwant look for alarm configured. How could I look for? If I want configured alarm. How could I do?

Suggestion To thank

6/27/2008 8:12 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, if you have a look to the help of the TP-Designer SW then you can't find any note aboute Alarms. So I think a TP070 do not have this feature. Sollution 1: Create a screen with your Alarm messages and change to the Alarm screen in case of an error. Sollution 2: Create a single Alarm screen with an ASCII output field and in the PLC program copy your differnet message texts to the ASCII output field (if the TP070 supports ASCII output fields) in case of errors. I hope this helps. Helmut
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank

6/30/2008 4:17 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/12/2024 Posts: 4040 Rating: (195)	closed cause question posted twice. The second thread with the subject TP070 question is published wihtin the conference SIMATIC Panel. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on