Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Which programming tool will be easy to learn and program SIMATIC IOT 2040?

Created by: Sivapmd at: 11/15/2017 3:42 AM (1 Replies)

Rating (0)

Thanks 1

2 Entries

11/15/2017 3:42 AM	Rate (0)
Sivapmd Posts: 12 Rating: (0)	1.Which programming tool will be easy to learn and program SIMATIC IOT 2040? If I am starting freshly. [snip] ...sent from App ------------------------------------------------------------------------------------------ Split from SIMATIC IOT 2000 - Programming tool.
Sivapmd Posts: 12 Rating: (0)	Last edited by: Jen_Moderator at: 11/15/2017 12:03:32 PM New subject after splitting and deleted 2nd question, because it's in the previous thread.
Suggestion To thank Quote Answer

11/15/2017 7:15 AM	Rate (0)
chris_F Posts: 52 Rating: (2)	1. Node-RED would probably be the easiest tool to start with, its graphical, so you don`t have to write too much code yourself and there are a lot of possibilities with Node-RED. You can write some functions yourself, the preferred language for that would be JavaScript I think (but am not quite sure about that one). [snip] Best regards, Chris
chris_F Posts: 52 Rating: (2)	Last edited by: Jen_Moderator at: 11/15/2017 12:04:56 PM Deleted answer of 2nd question.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bergmanu

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2000 Programing

Follow us on