Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarm view without button

Created by: PLCforEver at: 7/15/2008 7:09 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/15/2008 7:09 AM	Rate (0)
PLCforEver Posts: 99 Rating: (3)	Dear forum member, I do not undurstand this. I create an Alarm View in WinCC flexible 2007 for the TP277 but no button is created . A button would be welcomed for accessing the infotext of the alarm. Gee, Midnight already
PLCforEver Posts: 99 Rating: (3)
Suggestion To thank Quote Answer

7/15/2008 9:15 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1170)	Dear PLCforEver, Please go to Properties of Alarmview Then select Properties -> Display Here you can select button "infotext" Best regards, Wizard

Suggestion To thank Quote Answer

7/15/2008 1:31 PM	Rate (0)
PLCforEver Posts: 99 Rating: (3)	Thanks! That solved it Have a nice day
PLCforEver Posts: 99 Rating: (3)
Suggestion To thank Quote Answer

7/15/2008 1:37 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1170)	You are welcome glad I could help. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on