Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Upgrade from S7-214 to S7-224 with elettronica HMI

Created by: Shaalan at: 8/10/2008 4:34 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/10/2008 4:34 PM	Rate (0)
Shaalan Posts: 12 Rating: (0)	Hi all, I made an apgrade for an PLC system, from old S7-214 to S7-224. the old system contains a screen with the followind data: elettronica vt100 vt1001sf000 I uploaded the software program from S7-214 and then downloaded it to S7-224, the HMI did not operate and showed an error 022. what is the problem? and how can i solve it? Is there any software libraries or something like that I need to add to microwin to operate this screen. Please I need your help. Thanx alot.
Shaalan Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

8/25/2008 3:49 PM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, go to the manual of the HMI and look for the Error number. This should help you to fix the problem. Regards Helmut
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on