Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Equipement

Created by: gabrielecalcinaia at: 7/23/2018 11:20 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

7/23/2018 11:20 AM	Rate (0)
gabrielecalcinaia Posts: 5 Rating: (0)	Hi,
gabrielecalcinaia Posts: 5 Rating: (0)	Last edited by: gabrielecalcinaia at: 7/23/2018 11:27:32 AM Last edited by: gabrielecalcinaia at: 7/27/2018 10:08:04 AM Last edited by: gabrielecalcinaia at: 7/27/2018 10:08:26 AM
Suggestion To thank Quote Answer

7/24/2018 7:02 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/14/2024 Posts: 8092 Rating: (878)	gabrielecalcinaia [snip] SIMODRIVE equipement bus (Flat ribbon cable X 301) pins & signal details. Which bus you are talking about? Please provide card MLFB number & attach the snap of connector.

Suggestion To thank Quote Answer

7/24/2018 10:07 AM	Rate (0)
gabrielecalcinaia Posts: 5 Rating: (0)	Hello and thanks
gabrielecalcinaia Posts: 5 Rating: (0)	Last edited by: gabrielecalcinaia at: 7/27/2018 10:07:45 AM Last edited by: gabrielecalcinaia at: 7/27/2018 10:08:46 AM
Suggestion To thank Quote Answer

7/26/2018 11:33 AM	Rate (0)
gabrielecalcinaia Posts: 5 Rating: (0)	up
gabrielecalcinaia Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

7/26/2018 2:11 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/15/2024 Posts: 4074 Rating: (357)	It is Not X301 but X351 gabrielecalcinaia Hello and thanks I am attaching the document that I have, only that it is in German, I would need it in English Attachment RIBBON_CABLE_DATA.pdf (272 Downloads)
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users gabrielecalcinaia

|

Share this page:

Share this page on...

Follow us on