Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication problem with cpu 224 using PC adapter and CP5512

Created by: kan13 at: 10/13/2018 3:55 AM (3 Replies)

Rating (2)

Thanks 3

4 Entries

10/13/2018 3:55 AM	Rate (0)
kan13 Posts: 7 Rating: (0)	Hi all, we got new spare cpu 224 plc but I cannot communicate with module in order download software. I am using PC adaptor (usb) and CP5512 card but in both cases it does not find cpu and asking to check parameters or port setting. I have assigned different address to adaptor , changed RUN to TERM and back, no luck. Could you please help what can be a problem? Thank you in advance
kan13 Posts: 7 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users lovelydhaya001

10/13/2018 10:24 PM	Rate (2)
Med_selmi Silver Member Joined: 4/17/2018 Last visit: 10/24/2024 Posts: 262 Rating: (60)	Hello kan13, If you use cp5512 card, you should set pg/pc with cp5512(PPI). It's the same like cp5511 in attachment. Attachment pginterface.JPG (254 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Oways85

10/14/2018 5:08 AM	Rate (0)
Yu-wen Tang Silver Member Joined: 10/7/2009 Last visit: 9/9/2024 Posts: 266 Rating: (92)	Hi, For S7-200, the Access Point of the Application in Set PG/PC Interface is Micro/WIN, not S7ONLINE. Best regards, Yu-wen Attachment PGPCInterface_MicroWin.png (223 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Duris_I

10/14/2018 1:27 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/23/2024 Posts: 4620 Rating: (708)	Hello, have you already seen this: https://support.industry.siemens.com/cs/ww/en/view/24781781
	Last edited by: Jen_Moderator at: 10/15/2018 11:16:32 AM Optimized link.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on