Failsafe Configuration Tool (FTC)

since last friday Siemens-F-devices can be confugured for third party controller.

Functionality of the S7-Fail-safe Configuration Tool
The S7-FCT offers the following functionality:

• Support of GSD configuration of fail-safe ET 200 modules of PROFIsafe address type 2
• Calculation and provision of the F_iPar_CRC for fail-safe module parameters

• Assignment of F-source and F-destination target addresses to the fail-safe modules

You can find the entry here:

S7-Fail-safe Configuration Tool (S7-FCT)

Best Regards,