Navigation

Is it possible to read value from Siemens S7-1500 and send it to microcontroller?

Created by: Nipun Kumar at: 4/26/2019 3:24 PM (1 Replies)

4/26/2019 3:24 PM	Rate (0)
Nipun Kumar Posts: 5 Rating: (0)	Is it possible to read value from Siemens S7-1500 and send it to microcontroller using serial interface on siemens iot2040.?,. ------------------------------------------------------------------------------------------ Split from How to use the IOT 2040?.
Nipun Kumar Posts: 5 Rating: (0)	Last edited by: The Helping Hand at: 04/29/2019 09:41:38 New subject after splitting
Suggestion To thank Quote Answer

4/29/2019 9:56 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, yes this is possible. You can use S7 or OPC UA to get the data from the S7-1500. For the serial communication you can use RS232, RS485 or RS422. The most simple way is to use node-red for this. You can find some topics about these two things in the forum by using the search function. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer