Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RF186C - Problems

Created by: AutoGen_9622960 at: 8/5/2019 11:56 AM (13 Replies)

Rating (0)

Thanks 3

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

8/8/2019 10:41 AM	Rate (0)
AutoGen_9622960 Advanced Member Joined: 12/18/2015 Last visit: 8/16/2024 Posts: 12 Rating: (0)	Attachment Modul_GSMDL.png (474 Downloads)

Suggestion To thank Quote Answer

8/8/2019 10:42 AM	Rate (0)
AutoGen_9622960 Advanced Member Joined: 12/18/2015 Last visit: 8/16/2024 Posts: 12 Rating: (0)	Attachment Modul_TO.png (444 Downloads)

Suggestion To thank Quote Answer

8/8/2019 7:03 PM	Rate (0)
Owei Gold Expert Joined: 10/1/2013 Last visit: 5/8/2024 Posts: 605 Rating: (71)	Thanks for sharing that information. I'm quite sure you could also use the GSDML from the Web Server. But in that case you'd have to set all the parameters required directly at the Web Based Management of the communication module. I'm not 100% sure about that.

Suggestion To thank Quote Answer

8/13/2019 10:32 AM	Rate (0)
AutoGen_9622960 Advanced Member Joined: 12/18/2015 Last visit: 8/16/2024 Posts: 12 Rating: (0)	Hello again, I haven't had much time lately. I followed the same lead. If I can't configure readers from TIA level, I can do it from WBM level. Configuration can only be done without CPU connection. Of course all options are available. Once connected to the CPU, the configuration fields are grayed out. Simple technological commands do not work. Everything looks OK in the WBM log. The commands are received. However, they are not executed (RESET does not initiate the reader). Maybe i should use the IDENT profile and create the commands yourself according to the instructions. Unfortunately, I don't have time for this. The program must be as simple as possible.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on