Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Shutter percentile moving help.

Created by: Nyeke-Nyoka at: 1/17/2020 8:34 PM (9 Replies)

Rating (2)

Thanks 1

10 Entries

1/17/2020 8:34 PM	Rate (0)
Nyeke-Nyoka Regular Member Joined: 6/21/2019 Last visit: 9/12/2023 Posts: 8 Rating: (0)	Hello! Shutter percentile moving help. My problem would be the percentile moving of the shutter! There would be 0 the above. 100 the let down. The shutter 1 minute 20 ig go 0-100% Oh now the there is not a trouble between two only if the shutter 40% ról 60% ra I would like to move it! Or back up,we say it 60% ról 20% ra! This is my big problem! I would ask your help! THK:Nyeke Nyoka

Suggestion To thank Quote Answer

1/17/2020 8:51 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/13/2024 Posts: 34208 Rating: (4261)	Hello Nyeke-Nyoka, at first welcome to the forum. You have deleted your first topic and are now opening a new topic with the same, incomprehensible functional description. Edityour topic by adding the functional description in your mother tongue. Perhaps the functional description can then be better understood with a translation program that we use. Thanks

Suggestion To thank Quote Answer

1/17/2020 9:12 PM	Rate (0)
Nyeke-Nyoka Regular Member Joined: 6/21/2019 Last visit: 9/12/2023 Posts: 8 Rating: (0)	Okay! % : I would like to grant the situation of the shutter in a value! shutter 1perc 20 seconds moves into a full end situationIs my request understandable? % :értékben szeretném megadni a redőny helyzetét! redőny 1perc 20 másodpercet mozog teljes véghelyzetbe! Érthető a kérésem?

Suggestion To thank Quote Answer

1/18/2020 8:33 AM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/13/2024 Posts: 34208 Rating: (4261)	In german forum I found a good program from the User fmd. You can drive the shutter with digital Inputs or a analog setpoint (value over LOGO! display). I have adapted the program to your requirements. The position indicator in the display as a bar graph can unfortunately not be positioned so that the black part of the bar graph is the path of the shutter. The black part is the way, because the shutter can still drive. To the digital buttons: A short keystroke of less than one second moves the shutter for the duration of the keystroke. Pressing the button for longer than a second moves the shutter to the relevant end position. I hope that this program meets your expectations. Attachment Shutter - digital & analog_FS4.zip (326 Downloads)

Suggestion To thank Quote Answer

1/18/2020 8:40 PM	Rate (0)
Nyeke-Nyoka Regular Member Joined: 6/21/2019 Last visit: 9/12/2023 Posts: 8 Rating: (0)	Köszönöm! Szuper Egy kérdésem volna még! Melyik blokkban állítom a futási értéket? Most 1min 20secundum! De van olyan redőnyöm is ami kevesebb! Thank you! Great He would be a question of mine yet! In which block do I claim the running value? Now 1min 20secundum! But I have a shutter like that what less are!

Suggestion To thank Quote Answer

1/18/2020 8:59 PM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/13/2024 Posts: 34208 Rating: (4261)	It is the result of the pulse generator B025 and the counter B024. With the current setting, the pulse generator makes a pulse every 80/100s. Counter B024 counts the pulses with a maximum of 100 times. 80/100s x 100 = 80s. The 80/100s are made up of the ratio of 79/100s pause time and 1/100s pulse time. Do you want e.g. have a runtime of 63s, you have to set the pause time to 62/100s. 62/100s + 1/100s = 63/100s 63/100s x 100 = 63s Attachment Untitled.png (288 Downloads)

Suggestion To thank Quote Answer

1/18/2020 10:19 PM	Rate (0)
Nyeke-Nyoka Regular Member Joined: 6/21/2019 Last visit: 9/12/2023 Posts: 8 Rating: (0)	Köszönöm! Értem az impulzus adót! Tehát a B025 állítom és már jó is! Meg csináltam jól működik!Kicsit csal! Szuper! Köszönöm! Thank you! For me the impulsion tax! So the B025 I claim it and already good! I did it well it's working!cheats a little bit! Great! Thank you!

Suggestion To thank Quote Answer

1/18/2020 10:26 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/13/2024 Posts: 34208 Rating: (4261)	It's all just a theoretical calculation. Exact position information can only be given if a corresponding position sensor is installed on the shutter as feedback. So this is only a possible position calculation. That this will not 100 percent work, it would have been clear from the start.

Suggestion To thank Quote Answer

1/18/2020 10:56 PM	Rate (0)
Nyeke-Nyoka Regular Member Joined: 6/21/2019 Last visit: 9/12/2023 Posts: 8 Rating: (0)	Ez így is tökéletes! Az időt át tudom állítani amikor megmérem a redőnyt stopperrel! Sajnos pozició érzékelőt nem tudok felszerelni! Szuper ez így! Köszönöm! This is perfect so! I can put the time in another place when I measure the shutter with a stopwatch! Unfortunately pozició I cannot install a sensor! This is cool so! Thank you for the help!

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

1/19/2020 4:49 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/13/2024 Posts: 34208 Rating: (4261)	Hello Nyeke-Nyoka, you're welcome....

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on