Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication was restored after removing MMC card and doing a reset - Why?

Created by: siv_73 at: 3/4/2020 1:21 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/4/2020 1:21 PM	Rate (0)
siv_73 Member Joined: 10/1/2018 Last visit: 4/6/2023 Posts: 2 Rating: (0)	Hi Guys, I faced the similar issue.Please find attached pic of the error shown on the screen. Communication was restored after removing MMC card and doing a reset. What may be the reason for this issue? Thanks in advance Siva ------------------------------------------------------------------------------------------ Split from S7 CPU1512 Hardware components removed or missing. Attachment L9 CP card error.PNG (390 Downloads)
	Last edited by: Jen_Moderator at: 03/05/2020 09:58:32 New subject after splitting
Suggestion To thank Quote Answer

3/4/2020 1:24 PM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 11/11/2024 Posts: 22444 Rating: (3029)	hi, can you attach the complete diagnostic biffer? Regards Christoph

Suggestion To thank Quote Answer

3/4/2020 2:16 PM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1054)	hi siv_73, this is a message from 2012. Are you sure this is an actual theme? reason for this diagnostic-buffer-entry is that the configuration, that is loaded to the CPU, is containing a CP1543-1, that can not be reached by the CPU. Can you tell us something more about this station? Is there really a CP1543-1? Have you had a look online with TIA? (I recommend you to do so) hope this helps, regards,
	FCK WAR! Be nice!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on