Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to move a sliding joint on NX MCD only while a bit signal is true

Created by: mschaberle at: 5/4/2020 8:19 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/4/2020 8:19 PM	Rate (0)
mschaberle Experienced Member Joined: 3/27/2017 Last visit: 10/31/2024 Posts: 24 Rating: (2)	I have a model on NX MCD where I want to control some joints with some PLCSim Advanced outputs. Is there a way to move a sliding joint continuously only while an ouput bit from my PLC is True? I'm trying to use a position control and an operation to control it, but when I change my output to False my joint continues to move to the destination set, I wish it stopped moving as soon as the output goes to false.

Suggestion To thank Quote Answer

5/7/2020 11:28 AM	Rate (0)
oooo_zyz Member Joined: 10/18/2019 Last visit: 5/24/2024 Posts: 2 Rating: (0)	I suggest you use the expressions. For example: IF (Single) then( PosCtrl==100) Else (PosCrtl==CurrentPos)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on