7/13/2020 1:16 PM | |
Joined: 6/19/2017 Last visit: 8/5/2024 Posts: 8175 Rating:
|
Hi baraccuda, I'm sorry that you weren't able to receive support till now. Please keep in mind that this Technical Forum is only a platform where users are helping each other in their free time and free of charge. If you want a solution over the Technical Forum than I recommend to post your questions in English with all relevant information (Software, PLC, Screenshot). If you aren't so good in Englisch I suggest to use a translator and copy&paste the text from the translator in your post. If you want an official support from Siemens than I can only recommend to open a Support Request or to get in contact with your Siemens partner in your country for your issue:
Best regards, |
My Forum is the place to personalize your profile, |
|
This contribution was helpful to
3 thankful Users |
7/15/2020 12:49 AM | |
Posts: 18 Rating:
|
|
7/15/2020 10:11 AM | |
Joined: 6/19/2017 Last visit: 8/5/2024 Posts: 8175 Rating:
|
Hi baraccuda, If you want to receive any help than you should follow the suggestions from the users and my post: - Don't post a screenshot of your translation - Please have the effort to write it in a post. - Provide all necessary information to be able to help you (which software, PLC and issue do you have exactly?). As long as you don't bother to cooperate with us, nobody can help you. Best regards, |
My Forum is the place to personalize your profile, |
|
This contribution was helpful to
3 thankful Users |
Follow us on