7/24/2020 6:52 PM | |
Joined: 11/19/2014 Last visit: 5/14/2024 Posts: 2 Rating:
|
I have programing RMH760B-1 (older) with ETS and I don`t get any error but Any communication KNX it is done . I have monitoring bus but any group it is read and write by RMH760B ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 07/27/2020 09:49:40New subject after splitting |
|
7/27/2020 1:30 PM | |
Joined: 7/25/2012 Last visit: 9/12/2024 Posts: 269 Rating:
|
Can specify more detailed, what's your trouble? It is not fully clear from your message. |
Best regards, |
|
8/4/2020 6:41 PM | |
Joined: 7/25/2012 Last visit: 9/12/2024 Posts: 269 Rating:
|
Hi, you can try to test via other SW - ACS790 - download from : https://support.industry.siemens.com/cs/ww/en/view/109481853 For newer ETS you can try to download KNX database file from : https://www.hqs.sbt.siemens.com/cps_product_data/data/en/ets4/RMH760B_v3d0.knxprod Try to download the controller again. Or it could be that the controller is damaged. |
Last edited by: Jen_Moderator at: 08/05/2020 09:52:45Optimized link. Best regards, |
|
Follow us on