Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

pack addresses

Created by: dream1 at: 5/4/2006 9:57 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/4/2006 9:57 AM	Rate (0)
dream1 Posts: 13 Rating: (0)	[:)] hello, i need help,I am using a "IM151-1 Standard" with 4 slots, with 4 cards DI inputs"4DI DC24V ST", my problem is what i can't do the pack adress and aren´t no why, so only use 4 bits of the byte. My best regards..
dream1 Posts: 13 Rating: (0)	Last edited by: dream1 at: 5/4/2006 10:02 AM
Suggestion To thank

5/4/2006 11:48 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hello, Do you use a GSD-file? Perhaps the following link will help you http://support.automation.siemens.com/WW/view/en/18848628 Best regards Wizard

Suggestion To thank

5/5/2006 9:51 AM	Rate (0)
Morten Bronze Member Joined: 9/27/2005 Last visit: 4/26/2024 Posts: 203 Rating: (32)	Hallo, in HW-Config: Mark the DI´s and click the button "Pack Adresses". Is this not possible? Greetings Morten

Suggestion To thank

5/5/2006 4:57 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/14/2024 Posts: 4113 Rating: (195)	Closed: cause topic posted twice. Here you will find the second topic with is replied: pack adresses in the conference STEP 7 / STEP 7 Lite
	Last edited by: O_Moderator at: 3/17/2010 11:31 AM conference-link edited My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on