10/2/2020 9:06 AM | |
Joined: 9/20/2018 Last visit: 1/2/2024 Posts: 42 Rating: (4) |
Hello Everyone I am facing issue which is similar. I have 1 Wincc Server and 1 Wincc Client. Wincc Server is also Acts as a OS client . For Web access I have created Administrator group named Webserver and create one user below it. On Web client i have checked using above mentioned user and it is working fine. Now i have unable Simatic Logon option to login in wincc for OS Client. For setting up Simatic logon i have created above mentioned group and user. Also Assigned User to group. After that if i check on Webclient then it is not working properly. I can able to login in Wincc Web client but all Area button are grayed out. But if i login with same user in OS Client then i can able to see area button and access button also. Did i miss something ? Can you please suggect what what things need to do for Setting up Simatic logon for webclient. Does Installation of simatic logon required in Wincc Web Client PC ?? ( P. S i have not installed SIMATIC LOGON in Webclient PC) Thank you. ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 10/02/2020 12:08:14New subject after splitting |
|
10/2/2020 12:30 PM | |
Joined: 9/20/2018 Last visit: 1/2/2024 Posts: 42 Rating: (4) |
Thank you for quick reply Yes i have installed all plugin including APC and BPC. Also I can able to see PC name and Login id in Connected web navigator client status. I have attached excel sheet here where i have mentioned step i did. Also mentioned cases and its observation, Thank you. AttachmentWEBCLIENT_ISSUE.xlsx (35 Downloads) |
Last edited by: AutoGen_6024931 at: 10/02/2020 12:45:58 |
|
Follow us on