Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Difficult variant of cams. Please help.

Created by: Burumdurum at: 1/13/2009 12:35 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/13/2009 12:35 PM	Rate (0)
Burumdurum Posts: 31 Rating: (0)	Hi everybody, I have Scout v 3.2.1, but i need to move my synchron axis on circle path (like in scout v 4.1). I was trying to move axis1 with sinusoid and axis2 with cosinusoid by means of cams, so together they could give a circle. But it not working, cause i cant haveboth my axis synchronous without leading. Im wondering, may be there is another way how to connecttoone axis with one axis one cam (with sin) and to another one another cam(with cos) ? Will be really appreciate foe any ideas) Best regards, Tanya
Burumdurum Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

1/13/2009 2:21 PM	Rate (0)
sosynoid Posts: 10 Rating: (0)	I don't know every difference between 3.2 and 4.1 but isn't it possible to connect your first axis with a cosinus cam and your second axis with a sinus toa master virtual axis ?
sosynoid Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

1/16/2009 11:40 AM	Rate (0)
brumdurum. Posts: 4 Rating: (0)	Yes, it seems like. I did first virtuelaxis as master and two my real axes slaves. But it cames mistake foraxis3. //Befehl abgebrochen (Grund: 20, Befehlstyp: 1657) -20-Slave ist nicht betriebsbereit// Strange is that axis2 is working correct, and i dont understand why it is a problem with axis3. They both commected to axis1, and both with their cams.. p.s. im uploading my projeckt in attachment. Best regards, Tanya Attachment x1.zip (341 Downloads)
brumdurum. Posts: 4 Rating: (0)	Last edited by: brumdurum. at: 1/16/2009 11:45 AM
Suggestion To thank Quote Answer

1/16/2009 12:54 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hi, if you would use Achse_3 please enable the axis In your program you enable achse_1 and achse_2 b ut not achse_3. Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on