Navigation

How to reduce the buffer size?

Created by: Duduedu at: 11/25/2020 8:35 PM (1 Replies)

11/25/2020 8:35 PM	Rate (0)
Duduedu Posts: 5 Rating: (0)	Hi! Could you show me where did you reduce the buffer size? eric00058 Hi, I got the answer toady: The serial node has a fixed size buffer. Reduce the buffer size in the configuration page will get the required data from UART port. ------------------------------------------------------------------------------------------ Split from No output in the debug window of node red.
Duduedu Posts: 5 Rating: (0)	Last edited by: Jen_Moderator at: 11/26/2020 10:10:15 New subject after splitting Last edited by: Jen_Moderator at: 11/26/2020 10:11:28 Inserted quote.
Suggestion To thank Quote Answer

11/30/2020 2:17 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, I don't really know, because in the node there is no option. Maybe in former versions there was this option, because the initial post is some years old. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer