Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

round bar graf

Created by: MarCZ at: 1/21/2021 2:11 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/21/2021 2:11 PM	Rate (0)
MarCZ Advanced Member Joined: 2/10/2020 Last visit: 11/12/2024 Posts: 48 Rating: (1)	Hello all How I do it round bar graf? Look pleas to attachament. Attachment heat.JPG (707 Downloads)

Suggestion To thank Quote Answer

1/21/2021 4:38 PM	Rate (0)
CGA81 Silver Member Joined: 2/6/2015 Last visit: 11/8/2024 Posts: 80 Rating: (15)	Hello MarCZ, What kind of device are you using? Comfort Panel, Basic Panel.....? By example, with a Comfort Panel you could use the Gauge object. I attach a screenshot. Best regards, CGA81 Attachment gauge.png (593 Downloads)
	If this Information really helps, you could use the Rate function Best Regards, CGA81
Suggestion To thank Quote Answer

1/22/2021 3:44 PM	Rate (0)
Prof. Frink Platinum Member Joined: 7/5/2013 Last visit: 11/18/2024 Posts: 3120 Rating: (516)	Hello MarCZ, check the Toolbox for HMI Projects. There you find Gauge Controls for Panels (Basic and Comfort). Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on