Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simocode ProV and C/V Module

Created by: Jwatson at: 2/3/2009 10:18 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/3/2009 10:18 PM	Rate (0)
Jwatson Posts: 10 Rating: (0)	Hello, What is the reason that the value presented in the Measured Values of Simocode ES for the Voltage on each Line is equal to the Line to GND voltage instead of the Line to Line Voltage. I have 460v Line to Line but get about 260 displayed. There is no GND to the module. is this a calculated value or do I have it connected incorrectly? Thanks, BJ
Jwatson Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

2/4/2009 9:27 AM	Rate (0)
LesPaul Posts: 467 Rating: (59)	Hello Jwatson, All it´s ok. Your wiring is correct. Simocode always is displaying the calculated line toGND value. Kind regards
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

2/4/2009 2:21 PM	Rate (0)
Jwatson Posts: 10 Rating: (0)	Thank you LesPaul for the quick reply. Maks me feel somwhat better. At least the wiring is OK. Why is it reading this way insted of presenting the Line - Line Voltage.
Jwatson Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on