Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

1 Project, 2 Programming computers

Created by: Jeebs at: 9/17/2008 10:05 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/17/2008 10:05 AM	Rate (0)
Jeebs Posts: 218 Rating: (28)	Hi, As the subject already mentions, we have 1 WinCC 6.2 project which we would like to access/configure/develop using 2 different computers. At the same time. Is this possible with WinCC 6.2? If so, can someone point me in the right direction? Thanks in advance, Jeebs
Jeebs Posts: 218 Rating: (28)
Suggestion To thank Quote Answer

9/17/2008 11:28 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, see WinCC information system in chapter Configuration > Multi-User system > Remote Configuration
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

9/17/2008 2:40 PM	Rate (0)
Palmerita Posts: 102 Rating: (11)	Hi Jeebs!! I am sure I read a similar topic in this forum, and I think Danielle (or maybe Salma) gave a very cool tip... It was something like working with the project as server in one computer and as client in the other ones... But I cannot find it
Palmerita Posts: 102 Rating: (11)
Suggestion To thank Quote Answer

12/2/2008 5:36 AM	Rate (0)
Gaurav Kharadi Posts: 14 Rating: (1)	Hi, You can take both PCs on same MPI network with different address with same project. For Example: PLC: 2 PC-1:3 PC-2:4 with regards Gaurav H. Kharadi
Gaurav Kharadi Posts: 14 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on