Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

10ms time stamping

Created by: kane at: 10/11/2007 7:18 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/11/2007 7:18 AM	Rate (0)
kane Posts: 15 Rating: (0)	Dear Sir, I want to do 10ms timestamping.I am having hardware of CPU414-2DP(6ES74142XJ04-0AB0) AND CP443-1 I have ET200M station (6ES7 153 2BA00 0AB0) with 6ES7321 7BH01 0XB0) So I have configured cpu as slave for synchronization in hardware configuration I have programmed FB62 in OB1,OB82,OB86,OB100,OB40 But I am not able to see any time stamps I want to see the time stamps in wincc Please tell me how to do this. If any one have sample prograom please send me with regard's kane
kane Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

10/11/2007 11:48 AM	Rate (0)
J_Bell Posts: 5822 Rating: (411)	Dear Kane, have you read this FAQ yet? How does the time-stamp function work in the ET200M, and what should you watch out for during configuration? Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer

10/11/2007 12:32 PM	Rate (0)
kane Posts: 15 Rating: (0)	Dear Bell, I read this FAQ.but my problem is the time stamps are not coming. I have configured s7400 with et200m station having one DI module (6es7321 7bh01 0ab0) and in hardware configuration i have enabled cyclic interrupt(OB 35 to 10ms) . and in blocks i have configred FB62 in OB1,OB86,OB35,OB100. so my requirement is it should show the time stamp for every input. so in data block i am getting stored timestamps which are not changing even if i give a input s/l on-off I am not getting the time stamps for this. and when i configured in wincc i am getting all the alarms in same timestamp I want to know is there any specfic procedure to see the time stamp. and i want to know how to do this. Please help.I am sending my project. with regard's kane
kane Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

12/7/2008 8:36 AM	Rate (0)
ShahinM Silver Member Joined: 11/8/2005 Last visit: 5/31/2023 Posts: 335 Rating: (3)	Hi kane, Did you find any solution for reading time stamp of inputs?I have the same problem.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on