Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

1500 externalEncoder axis HOME problem

Created by: TechWing at: 10/19/2017 4:54 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

10/19/2017 4:54 PM	Rate (0)
TechWing Posts: 305 Rating: (1)	use TM count 2*24V for externalEncoder . how can use the encoder Z pluse to circulation setup the axis zero ? at the setting , all axis is running... i need the axis is 0~2000 ppr ,circulation auto running ,the same modul axis.
TechWing Posts: 305 Rating: (1)
Suggestion To thank Quote Answer

10/23/2017 9:37 AM	Rate (0)
Towome Platinum Member Joined: 7/9/2015 Last visit: 2/8/2023 Posts: 3300 Rating: (461)	Hi, sorry I have too litte experience on this behaviour, did you check the manual? TM COUNT 2X24V Regards, Towome
	If my post was useful, please rate me - thank you!
Suggestion To thank Quote Answer

10/26/2017 3:02 AM	Rate (0)
TechWing Posts: 305 Rating: (1)	the problem is finish ,TKS.... [snip]
TechWing Posts: 305 Rating: (1)	Last edited by: TechWing at: 10/26/2017 4:17:01 AM Last edited by: TechWing at: 10/26/2017 4:17:47 AM Last edited by: TechWing at: 10/26/2017 4:18:32 AM Last edited by: Jen_Moderator at: 10/26/2017 2:45:25 PM Deleted new question.
Suggestion To thank Quote Answer

10/26/2017 2:43 PM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 2/8/2023 Posts: 6451 Rating: (127)	New question published by TechWing is split to a separate thread with the subject How can to use MC_home,one execute to zero?. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

11/2/2017 3:28 PM	Rate (0)
HugoD Posts: 439 Rating: (107)	TechWing the problem is finish ,TKS.... [snip] Hello, Any info for somebody with the same issue? It is nice when somebody help you on the forum, but if you can give it back it's nicer. Hugo
HugoD Posts: 439 Rating: (107)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on