Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Convert programms from SCL to LADDER

Created by: Shiraziasl at: 5/26/2020 9:14 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

5/26/2020 9:14 AM	Rate (0)
Shiraziasl Posts: 1 Rating: (0)	Hi I have some programs that write with scl I wanna convert to ladder What should i do ------------------------------------------------------------------------------------------ Split from conversion SCL to LADDER.
Shiraziasl Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 05/27/2020 07:38:13 New subject after splitting
Suggestion To thank Quote Answer

5/26/2020 9:21 AM	Rate (0)
grrrrrroooo Platinum Member Joined: 3/16/2015 Last visit: 10/10/2021 Posts: 1250 Rating: (173)	Grab a large cup of coffee, grab a sea and start typing. It has to be done manually.

Suggestion To thank Quote Answer

5/26/2020 2:11 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/11/2024 Posts: 15389 Rating: (2443)	If the SCL is working, leave it alone. If the customer is willing to pay for the conversion, by all means, keep track of the time and charge them accordingly. Next time, they may allow working SCL logic. Shiraziasl Hi I have some programs that write with scl I wanna convert to ladder What should i do
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AmolGaikwad1200

5/26/2020 3:05 PM	Rate (0)
jacek d Platinum Expert Joined: 9/23/2005 Last visit: 11/12/2024 Posts: 4783 Rating: (730)	I have a strong feeling that he is the customer.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

5/27/2020 7:53 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 11/12/2024 Posts: 4024 Rating: (602)	Hi, there are some older entries about SCL - it´s for S7-300/400 but it´s similar to SCL for S7-1200/1500. Please check this: S7-SCL V5.3 for S7-300/400 Getting Started or S7-SCL V5.3 for S7-300/400 Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on