Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Software for upload parameters from V20 inverter

Created by: akbar_torkashwand at: 8/24/2020 7:56 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/24/2020 7:56 AM	Rate (0)
akbar_torkashwand Bronze Member Joined: 6/14/2015 Last visit: 11/14/2024 Posts: 243 Rating: (2)	Hi EVERY BODY. I want to back up from parameters of V20 inverter. Is there any software to upload parameters from V20 inverter? also I need transfer parameters to a new inverter.what should I do?
	Last edited by: akbar_torkashwand at: 08/24/2020 08:06:42
Suggestion To thank Quote Answer

8/24/2020 1:29 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/23/2024 Posts: 4620 Rating: (708)	akbar_torkashwand Hi EVERY BODY. I want to back up from parameters of V20 inverter. Is there any software to upload parameters from V20 inverter? also I need transfer parameters to a new inverter.what should I do? Hello, check below link: https://support.industry.siemens.com/cs/ww/en/view/109743980
	Last edited by: Jen_Moderator at: 08/24/2020 14:12:16 Optimized link.
Suggestion To thank Quote Answer

8/25/2020 6:16 AM	Rate (0)
akbar_torkashwand Bronze Member Joined: 6/14/2015 Last visit: 11/14/2024 Posts: 243 Rating: (2)	Ste39 akbar_torkashwand Hi EVERY BODY. I want to back up from parameters of V20 inverter. Is there any software to upload parameters from V20 inverter? also I need transfer parameters to a new inverter.what should I do? Hello, check below link: https://support.industry.siemens.com/cs/ww/en/view/109743980 THANKS SO MUCH. but it's a device that you can save parameters in CF . I read about V20 here. so I found that there isn't any software for upload program from V20 inverter.

Suggestion To thank Quote Answer

8/25/2020 8:18 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/23/2024 Posts: 4620 Rating: (708)	akbar_torkashwand Ste39 akbar_torkashwand Hi EVERY BODY. I want to back up from parameters of V20 inverter. Is there any software to upload parameters from V20 inverter? also I need transfer parameters to a new inverter.what should I do? Hello, check below link: https://support.industry.siemens.com/cs/ww/en/view/109743980 THANKS SO MUCH. but it's a device that you can save parameters in CF . I read about V20 here. so I found that there isn't any software for upload program from V20 inverter. Hello, yes you are right, there is no software PC —> v20

Suggestion To thank Quote Answer

8/22/2023 1:05 PM	Rate (0)
Jack0004 Advanced Member Joined: 12/16/2021 Last visit: 8/22/2023 Posts: 126 Rating: (1)	Hi, Check out the web access to upload parameter from V20 inverter SMART ACCESS V20 DRIVE Regards akbar_torkashwand Hi EVERY BODY. I want to back up from parameters of V20 inverter. Is there any software to upload parameters from V20 inverter? also I need transfer parameters to a new inverter.what should I do?
	If The Information Helpful, Then Don't Forget Give (To thank ) and Rate It
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on