Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

2AI I 2WIRE ST analog electronic module

Created by: Manoj R at: 12/19/2014 5:50 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/19/2014 5:50 AM	Rate (0)
Manoj R Posts: 26 Rating: (0)	Dear sir, Can u please tell me what is the use of Mana terminal in Analog Input card2AI I 2WIRE ST analog electronic module. I read the manual but am unable to understand. Thanks and regards, Manoj R
Manoj R Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

12/19/2014 7:26 AM	Rate (0)
KSN Platinum Member Joined: 8/25/2006 Last visit: 6/1/2023 Posts: 2181 Rating: (272)	Hello. You didn't mention an order number of module. I assume you talk about ET200S 2AI module (6ES7134-4GB01-0AB0). If so, look at attached manual, chapter 4.3. Attachment ET200S_e.zip (58 Downloads)

Suggestion To thank Quote Answer

12/19/2014 9:40 AM	Rate (0)
Manoj R Posts: 26 Rating: (0)	Dear KSN, Yes i was talking about the same module. Thanks for sharing the manual. I will have a look. Thanks and Regards, Manoj R
Manoj R Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on