Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

300300 alarm at start up

Created by: gvjr68 at: 7/3/2013 3:06 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

7/3/2013 3:06 PM	Rate (0)
gvjr68 Posts: 7 Rating: (0)	Hi can anyone tell me how to get rid of 300300 alarm at start up? I also have a red light on my spindle drive as soon as power is applied. Thanks
gvjr68 Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

7/3/2013 3:37 PM	Rate (0)
APC Tech Team Posts: 391 Rating: (50)	gvjr68 Hi can anyone tell me how to get rid of 300300 alarm at start up? I also have a red light on my spindle drive as soon as power is applied. Thanks /tf/WW/en/Posts/87964#top
APC Tech Team Posts: 391 Rating: (50)
Suggestion To thank Quote Answer

7/3/2013 7:29 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, Could you provide us what Control is this ??? 810D-840D ??? When do you get this alarms...have you checked your Drive Cliq cable ??? When machine is running do you get this alarm / standstill Provide us the details... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

7/3/2013 8:56 PM	Rate (0)
gvjr68 Posts: 7 Rating: (0)	Hi I have a siemens 840 C control and it was setting turned off for a few days. When we powered it up I got a 300300 alarm. The power supply will go green then yellow but it has 2 red lights lit up. And there is a red light on the spindle drive and 6FC51140-AA02-0AA0 internal board also has a green and red light both. Servos will not turn on but hydraulics will. Can anyone help me? Thanks
gvjr68 Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

7/4/2013 4:28 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, I think your looking in to the IR or UE module...The Red light LED is in the TOP or the bottom... This indicates there is fault inside the module....provide us the details.... May be there is not Data ...Please check you have NC and PLC informations properly.... Check it out and provides us the details... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

7/4/2013 8:44 AM	Rate (0)
0_0 Platinum Member Joined: 7/22/2008 Last visit: 4/14/2022 Posts: 1884 Rating: (174)	RIP
	Last edited by: 1test at: 6/8/2016 9:55:26 AM ~(‾▿‾)~
Suggestion To thank Quote Answer

8/6/2013 3:40 PM	Rate (0)
gvjr68 Posts: 7 Rating: (0)	840C siemens control. Thanks
gvjr68 Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

8/7/2013 1:08 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/13/2025 Posts: 4114 Rating: (195)	Follow up question is split to a seperate thread with the subject Alarm 165033 and 165037 #2 when I try to reload. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on