Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

32 bit floating point swapp

Created by: AnsuAbinesh at: 3/16/2011 6:19 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/16/2011 6:19 AM	Rate (0)
AnsuAbinesh Experienced Member Joined: 12/14/2010 Last visit: 8/16/2023 Posts: 116 Rating: (0)	Dear Experts, Here i have communicated EM6400 conzerv meter with CP341 modbus master. i have read kilowatt hour parameter as a 32bit floating point.actually thisreading is integrated value. But this reading some times matching with em6400 and some times not matching with em6400, like up and down is there in modbus data. as per discussion with em6400 technical support,they said,use byte swapping instruction. i want to know how toswapp following compination 1.ABCD 2.BADC 3.CDAB 4.DCBA Kindly give us solution. thanks in advance.

Suggestion To thank

3/16/2011 11:41 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 9/16/2023 Posts: 2683 Rating: (135)	Thread closed, because question is already discussed in the following thread Swapping of Floating point. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on