Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

3D View of Object and Rotation Feature

Created by: ssmanku1699 at: 7/22/2013 11:22 AM (2 Replies)

Rating (1)

Thanks 1

3 Entries

7/22/2013 11:22 AM	Rate (0)
ssmanku1699 Experienced Member Joined: 8/10/2009 Last visit: 7/19/2024 Posts: 166 Rating: (2)	Dear Users , In TIA wincc professional V11 , I need to display the 3D view of an object along with the rotation ie 360 Degreerotationby pressing Left to Right Button . Is it possible to do so ? Thanks. Sarabjot Singh Manku

Suggestion To thank Quote Answer

7/22/2013 9:59 PM	Rate (1)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/15/2025 Posts: 4393 Rating: (1463)	Hi, the product itself doesn't give specific support to 3d objects. My sugestion forrotating the object just in one axis: - Build a grafic list (status indication) with several (the minimal that you could, to not overload the system) consecutives differents 2d images of the object, each a little bit rotated as the previus. -Set the Graphic list withrange index with number (for example 0..360 in steps of 36 grades) - in screen, link the grafic list to internal tag and this with the slider.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ssmanku1699

7/25/2013 12:36 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	New question was splitted to 3D View of Object and Rotation Feature in WInCC V7.0 Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on