3TK2824 to 3SK1111-3ab30

Hello All,

First time poster sorry if there is any mistake with my post or if I can't ask things like this in my post.

We have a machine here with a 3TK2824-2BB40 and since I was informed that this is phased out and we were supplied with a 3SK1111-2ab30.

I am trying to figure out how to connect this. the inputs before from the 3TK2824 that were used were the following:

A1+,A2-,13,14,Y1 and Y2.

I believe Y1 and Y2 is connected to a start up switch to enable the motors of the machine to get power.

I know connecting A1, A2,13 and 14 are the same for the 3SK1111-2ab30. but for Y1 and Y2 i am not quite sure how to connect it. I checked the diagrams it seems that i have to connect it to IN F/S and T4. then bridge the rest, by the rest i mean T1 and In1, T2 and IN2, T3 and IN3. is this kind of connection correct?

Sorry if this kind of post is not allowed, again first time poster.

Thank you for any help you can give.

Please refer this FAQ Conversion from expiring safety relays (e.g. 3TK28) to their successors (e.g. 3SK) ; 66276467 ; 109741483 ; 109747906  which will help you.