Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

416-3/443-5 comms to 315-2DP slave

Created by: alindsay at: 9/24/2009 3:22 PM (4 Replies)

Rating (1)

Thanks 1

5 Entries

9/24/2009 3:22 PM	Rate (0)
alindsay Posts: 45 Rating: (0)	I have added a 300 station to my multiproject, added a rack, PSU and a 315-2DP, i have set the 315 to DP slave and attached it to the 443-5's DP network. When i configure some data and compile everything is OK, when i attempt to download to the 416 i get the following error download attention: in station * there are additional nodes that also have to be reloaded I dont know what this is telling me to do, anyone seen this before ?
alindsay Posts: 45 Rating: (0)
Suggestion To thank Quote Answer

9/24/2009 3:54 PM	Rate (1)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 1/20/2025 Posts: 12330 Rating: (2700)	Hello alindsay; Are you certain this is an error message (please show a screenshot if it is, so we may look at it). From memory, this is a warning message that appears when an 'intelligent' slave (typically another CPU)is connected to the DP master, reminding you that any changes in the DP exchanges must also be downloaded to the slave. This warning can be disregarded if no changes are implemented. Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users alindsay

9/24/2009 4:52 PM	Rate (0)
alindsay Posts: 45 Rating: (0)	Please find attached a screen shot Attachment download attention.JPG (147 Downloads)
alindsay Posts: 45 Rating: (0)
Suggestion To thank Quote Answer

9/25/2009 2:20 PM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 10/5/2024 Posts: 1162 Rating: (111)	Hello alindsay, as Daniel wrote: This is not an error message, this is "just" a warning. If there are no changes that concerns the other stations you can ignore it. Good luck Sabine

Suggestion To thank Quote Answer

9/25/2009 2:51 PM	Rate (0)
alindsay Posts: 45 Rating: (0)	thankyou both for clearing this up
alindsay Posts: 45 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on