Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

6ES5482-8MA13

Created by: Reid at: 5/16/2011 5:49 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/16/2011 5:49 PM	Rate (0)
Reid Posts: 14 Rating: (0)	Looking for the manual or data sheet on this module. We have many of these modules in service that came on or 20-30 German machines. Within the same group, some inputs appear to be sinking and others sourcing. Is this possible? Are there Jumpers or dip switches to to enable pull up resistors per individual inputs? Where can I find manuls on this older stuff?
Reid Posts: 14 Rating: (0)	Last edited by: Reid at: 5/16/2011 5:50 PM
Suggestion To thank Quote Answer

5/17/2011 2:18 AM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 10/10/2024 Posts: 3024 Rating: (1054)	Hello Reid the Inputs of the 6ES5482-8MA13 are all sinking and there no jumpers or DIP switches on the card to change this behaviour. Once place tofind the connection diagram and technical spec for it is in chapter 15.5.3 of the manual below (the S5-100U manual or ET100U has it too): S5-90U/S5-95U Programmable Controller System Manual I hope this helps
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer

5/28/2011 3:18 PM	Rate (0)
woisi Posts: 21 Rating: (3)	and you find spareparts of this and many other cards here
woisi Posts: 21 Rating: (3)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on