Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

6ES7 321 7BH01 0AB0(1ms) time stamp

Created by: Eastern at: 6/28/2011 8:42 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/28/2011 8:42 AM	Rate (0)
Eastern Posts: 557 Rating: (64)	hi I am using below module for 1 ms time stamping. 6ES7 321 7BH01 0AB0(1ms) time stamp. I need following clarification. 1) Electrical wiring:- Is this digital signal connect directly to module? if we will use relay in between it will disturb 1 ms time stamping. Please suggest proper guide line. 2) Programming:- please provide me the proper program or guideline. 3) Method to check.:- what is the procedure to check the program with 1 ms time stamp? Regards
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

7/14/2011 9:38 AM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating: (328)	Did you read this https://www.automation.siemens.com/mdm/default.aspx?DocVersionId=29386978827&Language=en-US&TopicId=25647250571(or in french: https://www.automation.siemens.com/mdm/default.aspx?DocVersionId=29386978827&Language=fr-FR&TopicId=25647250571)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on