Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

6GK1143-0AA01 card configuration

Created by: Springtea at: 7/10/2010 11:32 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

7/10/2010 11:32 AM	Rate (0)
Springtea Posts: 7 Rating: (0)	Excuse me. I have questions. I have step 5 and com cp1430 softwares, but I do not haveany cp143 configuration.Can I use EPROM(cp143)->FD(cp1430) to get the cp143 configuration content ? If I do this, doIpay attenation to know any suggestions? Beause cp143's EPROM orthe configuration is causedany damageor lost , I get in a big trouble. I must be careful. At last, thank your help.
Springtea Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

7/11/2010 8:26 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	Hello, Look at Compatibility of CP143 TF and CP1430 TF. You could use this option. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users J_Bell

7/15/2010 3:10 PM	Rate (0)
Springtea Posts: 7 Rating: (0)	Thanks your answers ! Q1. I try tofollow these steps, but I meet in troubles. If I choose CP143->FD(CP1430), it happens "cp interface not ready".On the other hand, If I choose EPROM(CP143)->FD(CP1430), it happens "system errors". I use the cable (TTY converts 25pin, 25pin converts RS232). It can connect 928U, 6GK1143-0TA2,and6GK1143-0TB1 ect..It's ok. Can someone give me hinets? Q2. What is they different between 6GK1143-0TA2 and6GK1143-0TB1 ? Attachment CIMG7054.JPG (129 Downloads)
Springtea Posts: 7 Rating: (0)	Last edited by: Springtea at: 7/15/2010 3:12 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on