stainpoke

Hi there

6GK1561-1AA00 card for Step7 PLC connection with desktop PC with
windows xp

having problems connecting our PC with this card to the mother board
after going into windows systems the card can be seen but with a
yellow question mark over it

have updated motherboards chipset drivers this never worked

have swapped the into two other PCs this never worked

is there any tests which can be performed on the card to indicate it
is working

barry mcgowan

______________________________________________________________

If you want to use the CP5611A2 for PG/OP communication, (i.e. with one of the follwing software STEP7, STEP7-Micro/Win, ProTool, ProTool/Pro, SIMATICPDM, or WinCC flex.)m you do not have to order any software. You can install its driver from Simatic Net. Just install the requested software and it will work.

stainpoke

could i use the PC adapter to usb.zip file instead of using the ethernet card then could ignore the card altogether and save ordering new card

looking forward to your reply

thanks
rgds
barry mcgowan

stainpoke

Thanks for getting back to me Aayman

we are running aS7- programme to operate a winch and some other operationswith a 200 display

there is a pc toobserve and maintain the machinery and PLC units

there was a problem with the computer so removed theprofibus card and popped it in another PC installed the seimens masterdrives software but the profibus card 6GK1561-1AA00 is not being recgonised by the new computer it was running windows 2000 but has since been upgraded to XP hoping this would solve the problem

Drivemoniter v5.1 is running
and it is running on windows 2000 not windowsxp as previously stated

took some screen shots but don't think the internet police here are letting upload

****
device manager

there is a yellow question mark then sub menu network controller has a yellow question mark with a yellow exclamation mark over it
*****

the next screen shot was of SIMATIC NET dianognotics -CP5611(PROFIBUS)
PROFIBUS/MPI Network Diagnostics

test ok
station address 0
Baudrate 1500.00Kbps
highest station address (HSA) 126
Minimum station delay Time (MinTsdr) 150tBit
Maximum station delay Time (MinTsdr) 980tBit
Setup time (tset) 240tBit


Bus Nodes
0
0tick marked with black tick on a white back ground

station active marked with a tick

*****

next screen was of the SIMATIC NET dianognotics -CP5611(PROFIBUS)

Hardware

status
Test OK

Hardware interrupts
IRQ 7 OK

Memory ranges :
0xe3080000 - 0xe308007f
0xe3000000 - 0xe307ffff
diagnostics indicates which resources the driver uses and
whether the resourcesare available

Access to PROFIBUS ASIC
Version of ASPC2 ASICS:STEP D
*******

there was another screen grab of the SIMATIC Manager - accessible nodes

cyan colouredupper box
with aopen folder withaccessible nodes ( with no nodes present )
****

this seems quite a mish mash of informationif the screen grabs worked it would have been better
with diagnostics cp5611 ( profibus) was the only one where there was no erroron the test

hopefully this information will help finding a conclusion

thanks for yourtime

barry

any one have driver of this card for windows 7 then please share it with me

i was trying to download online but i havnt found the drivers