Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

7-day timer alternatives

Created by: userB at: 2/14/2022 3:24 AM (16 Replies)

Rating (3)

Thanks 11

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

2/15/2022 5:25 AM	Rate (0)
userB Regular Member Joined: 1/14/2022 Last visit: 10/8/2024 Posts: 21 Rating: (0)	I have added the mappings. I don't understand how the analog network input NAI1 queries the data value from B005 up/down counter. Is there a mapping parameter to link NAl1 to read B005 data value? I see NAl1 is addressed VW2. Attachment Capture.PNG (533 Downloads)

Suggestion To thank Quote Answer

2/15/2022 5:37 AM	Rate (0)
userB Regular Member Joined: 1/14/2022 Last visit: 10/8/2024 Posts: 21 Rating: (0)	LWE Tag table mapping attached I will try to create the web page and upload it tomorrow for review. Attachment Capture2.PNG (522 Downloads)
	Last edited by: userB at: 02/15/2022 05:39:15 Last edited by: userB at: 02/15/2022 05:46:30
Suggestion To thank Quote Answer

2/15/2022 5:47 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/9/2024 Posts: 34180 Rating: (4256)	userB [snip] I don't understand how the analog network input NAI1 queries the data value from B005 up/down counter. Is there a mapping parameter to link NAl1 to read B005 data value? I see NAl1 is addressed VW2. [snip] The counter value is a unsigned double integer value (Dint). It's a 32 bit value, 4 bytes, 2 words. In the right word (VW2) are values form 0 to 32,767. With a analog network input you can only read 16 bit integer values (-32,768 to 32,767). Attachment Untitled.png (522 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users userB

2/15/2022 5:50 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/9/2024 Posts: 34180 Rating: (4256)	The entry in "Index 0" is wrong. The block type must be "VB" and not "V".

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users userB

2/15/2022 6:06 AM	Rate (0)
userB Regular Member Joined: 1/14/2022 Last visit: 10/8/2024 Posts: 21 Rating: (0)	Thank you I will change index 0 and 1 to VB access mode byte.

Suggestion To thank Quote Answer

2/15/2022 6:12 AM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/9/2024 Posts: 34180 Rating: (4256)	Oh, Index 1 are weekdays. This value is in the VM mapping indeed a byte but you must use in the LWE the indinvidual bits of this byte. VB5 = Weekday1 then V5.0 = Sunday1 V5.1 = Monday1 V5.2 = Tuesday1 V5.3 = Wednesday1 V5.4 = Thursday1 V5.5 = Friday1 V5.6 = Saturday1
	Last edited by: ixo65 at: 02/15/2022 06:13:18
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users userB

2/15/2022 6:25 AM	Rate (0)
userB Regular Member Joined: 1/14/2022 Last visit: 10/8/2024 Posts: 21 Rating: (0)	your correct, I will update it.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on