Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

802 C-base line axis position

Created by: areian at: 12/30/2012 7:15 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

12/30/2012 7:15 PM	Rate (0)
areian Regular Member Joined: 1/27/2010 Last visit: 10/4/2022 Posts: 16 Rating: (0)	Dear Sir, on 802 C-base line , I want to observe the Z-axis movement DW in the PLC program. for example when in CNC program , I have Z=1500 , I want when Z axis move 500 , in the PLC program , I could imposed situation On Z axis in position 500, and again in position Z=1000 , I could impose another restriction by writing PLC program on Z axis movement. Merry Cheristmas

Suggestion To thank Quote Answer

12/31/2012 7:46 AM	Rate (0)
syg Advanced Member Joined: 5/22/2009 Last visit: 7/14/2021 Posts: 17 Rating: (0)	hii.. plz try this procedure.. Attachment C:\Documents and Settings\IN213360\Desktop\axis position in plc .pdf (104 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ekalavya

|

Share this page:

Share this page on...

Follow us on