Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

802c plc subroutines

Created by: saeedplc at: 7/12/2012 4:30 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/12/2012 4:30 PM	Rate (0)
saeedplc Posts: 288 Rating: (4)	hello. is it possible to see the plc program inside the sinumerik 802c or 802d subroutines? best regards.
saeedplc Posts: 288 Rating: (4)
Suggestion To thank Quote Answer

7/13/2012 5:44 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... You cannot able to see the ladder logic in screen for 802C for 802D you can able to see in your Screen. Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

7/13/2012 2:58 PM	Rate (0)
saeedplc Posts: 288 Rating: (4)	hello . thank you for the reply. but i mean that how can i see plc program inside a standard subroutinesfor example emergency,cooling subroutines when i use these subroutines in the 802cplc programmingsoftware? these subroutines only have some inputs and outputs like a function and i don't know what happen inside of these. i want to see plc program that has been written into them ! best regards.
saeedplc Posts: 288 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on