Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

802c with error 400 003

Created by: Hung Nguyen at: 10/31/2010 9:06 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/31/2010 9:06 AM	Rate (0)
Hung Nguyen Posts: 1 Rating: (0)	My Sinumerik 802c controller doesn't work. On the screen, there is only a message about error 400 003. I tried to find thread with the same problem or to find out why this happened by using Diagnostics Guide. However, these efforts were not successful. Please tell me how to resolve this problem. Thanks in advance!
Hung Nguyen Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/31/2010 9:17 AM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Hi, The Fault occured inside the controller( Screen ). Better I has to sent to siemens service center. Find the attached alarm detail. Muthamizh. Attachment 400003.pdf (163 Downloads)
	Regards, ŠΜS
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on