Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

802D screen off-problem

Created by: Nanu_333 at: 11/28/2013 12:52 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/28/2013 12:52 PM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 12/23/2024 Posts: 196 Rating: (5)	Dear Exper, I have sinumerik 802D powerline system,the machine is running ok but many times when we access program screen for selecting the part program, the screen gets off & shows servo fault alongwith Id. The screen shot is attached to this thread. Please suggest what could be the problem. Is it related to system softwar corruption or smthing else. Regards, Nanu

Suggestion To thank Quote Answer

11/30/2013 2:09 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, Could be the problem of software better attach the screen shot. Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

11/30/2013 12:34 PM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 12/23/2024 Posts: 196 Rating: (5)	Hello sir, Please find attached screeshot when problem occurs. Regards, Nanu Attachment DSC_0082_1_.jpg (103 Downloads)

Suggestion To thank Quote Answer

12/2/2013 8:08 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Nanu_333 Hello sir, Please find attached screeshot when problem occurs. Regards, Nanu Hello, Try to remove the profibus cable and power on the machineand check... If it is again coming you need to reload the system software and check. With Best Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on