Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

802D SL - Customer Start Picture

Created by: MLAZZ at: 6/6/2010 2:09 AM (4 Replies)

Rating (0)

Thanks 2

5 Entries

6/6/2010 2:09 AM	Rate (0)
MLAZZ Posts: 62 Rating: (5)	Its possible put a image at the startup of the 802D SL control? Where I can find information about this? Thanks.
MLAZZ Posts: 62 Rating: (5)
Suggestion To thank Quote Answer

6/6/2010 10:33 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello... Yes it is possible to put the image at the startup of the 802D SL control but thecontrol musthave a systemsoftware version 1.4.5 or greater !!!!!! If the you have installed 802D SLtool box you can see in your laptop/PC ( ex:V01040600>Special>Custom Screen Sample) check it out.... bye/ Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/7/2010 2:34 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 11/14/2024 Posts: 593 Rating: (64)	Hi. Customer start picture. If to draw an analogy with PCU20 (on PCU20 it is possible) it is necessary additional software for formation SW for 802D sl. Likely, it is possible only through siemens support. Best regards. P.S. I yet did not establish ToolBox 1.04.06

Suggestion To thank Quote Answer

6/7/2010 5:41 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hi... Yes your right it is possible only through Siemens Support.... Tool Box 01.04.06 is available and present.... Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/8/2010 4:31 PM	Rate (0)
drill_easy Posts: 54 Rating: (8)	Hi, I guess you want modify the Siemens startup picture that is shown after power on. Following steps are necessary: Create your picture, save it as 24 – bit color bitmap (using paint or similar tools). Set the manufacturer password level Copy the picture on a CF card Call program manager and open manufacturer drive Copy the bitmap into the ico or appl directory After the next power on, your bitmap is shown. – I hope it is a nice one. drill_easy
drill_easy Posts: 54 Rating: (8)	Last edited by: drill_easy at: 6/8/2010 4:48 PM Ps: The name: startup.bmp
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users pfuser Rajni

|

Share this page:

Share this page on...

Follow us on