Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

802d

Created by: Rajni at: 9/18/2013 6:45 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/18/2013 6:45 PM	Rate (0)
Rajni Bronze Member Joined: 12/14/2012 Last visit: 1/6/2025 Posts: 70 Rating: (2)	Sir I have one maschine 802d its pcu get faulty so it will replace with new one & one axis control module also faulty so it also change with new one. but now I have no backup for that particular maschine. But I have another same maschine . My quistion is this 1 Can i load running maschine back up in breakdown maschine ? 2 only start up data is ok or I have to load axis drive data saprately also?
	Rajni
Suggestion To thank Quote Answer

9/19/2013 1:17 PM	Rate (0)
APC Tech Team Posts: 391 Rating: (50)	Dear KumarP, please forward your problem to the Siemens Hotline by opening a support request under: https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=38718979&caller=view best regards APC Tech Team
APC Tech Team Posts: 391 Rating: (50)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on