Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

810

Created by: CNC Chennai at: 8/28/2008 9:35 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/28/2008 9:35 AM	Rate (0)
CNC Chennai Experienced Member Joined: 12/5/2006 Last visit: 5/26/2023 Posts: 177 Rating: (2)	Dear All What is meant By DYNAMIC M CODE and STATIC M CODE.

Suggestion To thank Quote Answer

8/28/2008 2:41 PM	Rate (0)
denzilg_sa Bronze Member Joined: 7/5/2007 Last visit: 1/7/2025 Posts: 77 Rating: (5)	Hi Hyundai Firstly I assume that you are refering to the 810 NC to PLC interface, The diference between static and dynamic M functions: Static M function switches on a defined bit once the M function is read by the NC program this bit remains a logic 1 untill reset by the PLC program. A dynamic M function is as above it only remains high for one PLC scan and then returns to 0 Hope this could help Denzilg_SA

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on