Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

810d MMC100 (PCU20) front Usb port

Created by: sotvan at: 5/11/2013 10:34 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/11/2013 10:34 AM	Rate (0)
sotvan Posts: 36 Rating: (0)	Hi everybody How we can doing data backup via front USB port on a flash disk? what config or MD is required? 810D MMC100 (PCU20) tnks
sotvan Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

5/11/2013 1:38 PM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	sotvan Hi everybody How we can doing data backup via front USB port on a flash disk? what config or MD is required? 810D MMC100 (PCU20) tnks no usb support at drdos

Suggestion To thank Quote Answer

5/14/2013 8:23 AM	Rate (0)
sotvan Posts: 36 Rating: (0)	I want transfer MD to flash memeory via USB . it has windows OS.
sotvan Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

10/16/2013 7:23 PM	Rate (0)
John @ PPL Posts: 22 Rating: (0)	How have you got windows running on a PCU20? As far as I am aware, all PCU20's run old DRDOS and it has no drivers for USB Memory/Disk. Only Keyboards and mice will work in the USB socket. I did ask a tech if it was possible to replace DRDOS with MS-DOS6 and got told it might be technically possible, but the DOS system is packaged in amongst Siemens software and would not be a straightforward swap.
John @ PPL Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

12/11/2013 9:36 PM	Rate (0)
Luke B Posts: 3 Rating: (0)	810's with PCU 20 do not support USB. As was previously stated it is run off of DOS which does not support USB. Easiest way to transfer MD files would be over Eithernet (Network) Create an archive, then send the archive over the network.
Luke B Posts: 3 Rating: (0)	Last edited by: Luke B at: 12/11/2013 9:38 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on