Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

840C HDD restore

Created by: Drxxx at: 7/9/2007 12:18 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/9/2007 12:18 PM	Rate (0)
Drxxx Advanced Member Joined: 4/20/2007 Last visit: 10/23/2024 Posts: 11 Rating: (1)	Dear Sir, Just have similar problem with thread before Sinumerik 840C boot failure (Thread Starter: MarkejStarted: 23.05.2006 23:08Replies: 1) I try to restore Ghost file into HDD.After install that MMC cpu not booting up and have alarm cannot load file.Then I power off and on again,MMC cpu show only "0" indicator and nothing coming on screen. I need to know,if some missing file in drdos,How can I reinstall drdos in HDD ? Regards Glody

Suggestion To thank Quote Answer

7/22/2007 10:21 PM	Rate (0)
SteveJ Posts: 328 Rating: (29)	Dear Sir It is not recommended that Ghost is used for backup / Restore for 840C. For this purpose, Siemens recommend the use of WinInterserver & PCLink I suggest you contact your local siemens service office for information how this software can be obtained. Best regards SteveJ
SteveJ Posts: 328 Rating: (29)
Suggestion To thank Quote Answer

7/23/2007 11:09 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/17/2025 Posts: 4114 Rating: (195)	Here the Link to the referenced thread SINUMERIK 840C BOOT FAILURE
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on