Navigation

840C option execution from external

Created by: CIRO1973 at: 11/22/2012 1:54 PM (4 Replies)

11/22/2012 1:54 PM	Rate (2)
CIRO1973 Bronze Member Joined: 10/14/2011 Last visit: 12/27/2023 Posts: 68 Rating: (57)	Hi on a control 840C i have this options "execution from external hd", I selected program parameters execution from external hd = ON now I must write the job lists properly can anyone help? Partprogram is MPF2545 on LOCAL\ALENIA

Suggestion To thank Quote Answer

11/22/2012 2:13 PM	Rate (1)
Ekalavya Posts: 2964 Rating: (484)	CIRO1973 Hi on a control 840C i have this options "execution from external hd", I selected program parameters execution from external hd = ON now I must write the job lists properly can anyone help? Partprogram is MPF2545 on LOCAL\ALENIA Hello... Check this link may be useful: /tf/WW/en/Posts/2804 Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users CIRO1973

Joined: 10/14/2011

Last visit: 12/27/2023

Posts: 68

Rating:

(57)

then in the joblist should I write

SELECT MPF2545 LOCAL\ALENIA

is that correct?

1 thankful Users

Posts: 2964

Rating:

(484)

CIRO1973

then in the joblist should I write
SELECT MPF2545 LOCAL\ALENIA
is that correct?

Write it and check it out...

11/22/2012 3:15 PM	Rate (2)
CIRO1973 Bronze Member Joined: 10/14/2011 Last visit: 12/27/2023 Posts: 68 Rating: (57)	ok ty

Suggestion To thank Quote Answer

Share this page:

Share this page on...