Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

840D SF flashing

Created by: weinbrenner DR at: 11/17/2010 3:15 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/17/2010 3:15 AM	Rate (0)
weinbrenner DR Posts: 2 Rating: (0)	please help we have had a few problems with our b12 wienbrenner m/c stopped mid opreration with error abnormal program termination and error 2000 comunitcation errors also error 2001 plc has stopped manged to clear all this by loading our ghost disk any way now all running but now have on our 840D a flashing amber SF light any clues what this could be
weinbrenner DR Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

11/17/2010 7:29 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... You have cleared your NC-PLC it is requried to load the NC-PLC archive backups.... if you load the ghost NC-PLC archive backup will not get loaded.Manually you need select your backups and thenloadafter that only the SF light on the NCU will go off.... Check it out.... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

11/19/2010 12:43 AM	Rate (0)
weinbrenner DR Posts: 2 Rating: (0)	thanks for getting back to me manually loading not sure what you mean ?? i have loaded archive nc then archive plc
weinbrenner DR Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

11/20/2010 11:30 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	weinbrenner DR thanks for getting back to me manually loading not sure what you mean ?? i have loaded archive nc then archive plc Means Loading the NC and the PLC archive backups individually have your problem solved Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on