Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

840D sl - EStop

Created by: chris1989 at: 1/5/2011 5:10 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/5/2011 5:10 PM	Rate (0)
chris1989 Posts: 1 Rating: (0)	I have the following hardware solution :840D sl with NC710.2 ( OFF1 , OFF3 ( Quiq Step ) -from TK2828..) + Sinamics S120 . When pressed EStop button , opens first OFF3 and after few seconds(10) OFF1 . But when it is open OFF3 , all axes and spindle free stop ( not quiq stop ). Modified parameters are : p1135 , MD36610 , MD 36620. Other parameters to be modified ? chris1989
chris1989 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/5/2011 5:32 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hi.... Check out this link may be useful to you.... /tf/WW/en/Posts/50419#top Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on