Navigation

840d SL OPC Communications to embedded PLC?

Created by: gr36 at: 9/6/2013 10:42 PM (1 Replies)

Posts: 1

Rating:

(0)

I am trying to verify if communications are possible to read PLC data via the x130 connection of an 840d.

Seems like it may be possible, but have been unable to confirm.

If communications are not possible with the x130 port, any other options or special configurations required to make communications capable?

We are trying to interface with the following:

6FC53730-AA30-0AA1

SINUMERIK; 840D sl; NCU 730.3 with PLC 317-2 PN/DP

Thanks!

-Greg

9/7/2013 5:27 PM	Rate (1)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	yes it is possible to read plc data via X130 search for "5.2.4.9 SNC: Configuring the X130 interface (Company network)" in DoconWeb

Suggestion To thank Quote Answer

Share this page:

Share this page on...